uBrace1

The UBrace® offers a innovative solution to a long-standing issue associated with using umbrellas on tables. Traditional setups occasionally result in these umbrellas taking an unexpected flight, causing chaos and potential damage. Featuring a robust three-inch aluminum collar with stainless steel fasteners, the UBrace eliminates the need for a separate umbrella base. It presents the ideal remedy for securely anchoring your umbrella to a substantial table weighing 70 pounds or more, designed with a centering hole for ensuring the umbrella's stability. Please note that this exclusive product is solely available through Furniture Leisure. Once the UBrace assembly is in position, you can bid farewell to concerns about your umbrella unexpectedly dislodging from the table.

Umbrellas

Instructions to install the uBrace:

    uBrace Step 1
  1. Insert the umbrella pole into the table and through the centering ring in the cross brace.

  2. Open the UBrace by taking out the two bolts on each side of the ring assembly.
    3. uBrace Step 2
    uBrace Step 3
  3. Attach the UBrace to the umbrella pole just beneath the centering ring on the table by placing each half of the ring assembly around the umbrella pole. Insert the bolts; tightening them with the allen wrench provided. Tighten the bolts evenly until the collar will not move on the pole.


•••




uBrace2

The UBrace2 consists of a pair of collars designed for installation both above and below the table on the umbrella pole. This dual-collar assembly provides added stability, effectively anchoring the umbrella and preventing it from taking flight. This not only enhances safety but also reduces liabilities, minimizes maintenance, and decreases the wear and tear on your outdoor dining furniture. The UBrace-2, proudly manufactured by Furniture Leisure Inc., is tailored for use with a 1 ½-inch diameter umbrella pole. It's a smart solution to secure an umbrella to an outdoor table, particularly beneficial when the table exceeds 40 pounds in weight. This device is user-friendly, corrosion-resistant, and requires no ongoing maintenance.

Umbrellas

Instructions to install the uBrace2:


  1. Insert the umbrella pole through the hole in the table top. If there is a center brace under the table, place the pole through to the ground. Note: If there is no center brace or the table weighs under 40 pounds, a traditional umbrella base is recommended.

  2. Mark the umbrella pole the just above the table top where the top UBrace-2 collar will be installed. Lift up the pole to install the UBrace-2 collar where it is marked.

  3. Install by removing the bolts with the 3/16 inch allen wrench provided. Place the collar around the umbrella pole and tighten the bolts evenly where you marked the pole. Place the pole back into the table.

  4. With the pole placed in the table, attach the remaining UBrace-2 collar to the pole just beneath the centering brace hole by placing each half of the ring assembly around the umbrella pole. Insert the bolts; tightening them with the allen wrench provided. Tighten the bolts evenly until the collar will not move on the pole. Note: If there is no center brace, place the second collar just under the table top on the umbrella pole.

  5. When properly installed, the UBrace-2 collars will “sandwich” the table on the umbrella pole with one collar secured on top of the table and one underneath.

The two halves of the collar do not have to meet to be tight and correctly installed. If the pole can be physically pulled out of the table it must be tighten until the pole is fixed and will not slide out. Call 1-800-213-2401 with questions. The UBrace-2 will work with many manufactured tables. It functions without a traditional umbrella base best with tables that weight 40 pounds or more.